Aquasabi CO2 Diffusor Stainless Steel Flat 15
- Made of high-quality stainless steel
- Efficient CO2 atomisation through ceramic membrane
- Visually very appealing
- The necessary suction cups are included
- Replaceable ceramic membrane
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
These stainless steel CO2 diffusers dissolve up to 98% of the CO2 running through them. Small CO2 bubbles are distributed in the tank and guarantee an optimal CO2 uptake by the water plants. The CO2 dissolves easily in the tank due to the large ratio of surface to volume of the ceramic membrane.
These CO2 diffusers come with a combined J-Pipe. Additionally, two transparent suction cups are included.
Features
- With high-quality ceramic membrane
- Made of high quality stainless steel
- Compatible with pressurised gas cylinders
- With connection for commercially available 4/6mm CO2 tubing
- Transparent suction cups included
- Replaceable ceramic membrane
Usage
Recommended working pressure would be 1,5 bar.
It may take 24-48 hours till the CO2 diffusor produces a fine CO2 mist. The seal around the ceramic membrane needs to adjust to the new environment.
Alternatively it is possible to place the part of the diffusor with the membrane for 1-2 days into water. After watering the diffusor it should work properly. Please be advised that it is normal that a ceramic CO2 diffusor only produces fine mist from the whole membrane if you supply higher amounts of CO2. With less CO2 dosage only parts of the membrane produce fine CO2 bubbles.
Dimensions
| CO2 Diffusor 15 mm - 20 cm | |
|---|---|
| Total height | 190 mm |
| Total width | 65 mm |
| Diffusion area's diameter | 15 mm |
| Diffusor diameter | 25 mm |
| Diffusor height | 15 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor 15 mm - 25 cm | |
|---|---|
| Total height | 265 mm |
| Total width | 65 mm |
| Diffusion area's diameter | 15 mm |
| Diffusor diameter | 25 mm |
| Diffusor height | 15 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor 15 mm - 30 cm | |
|---|---|
| Total height | 295 mm |
| Total width | 65 mm |
| Diffusion area's diameter | 15 mm |
| Diffusor diameter | 25 mm |
| Diffusor height | 15 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor 15 mm - 35 cm | |
|---|---|
| Total height | 355 mm |
| Total width | 65 mm |
| Diffusion area's diameter | 15 mm |
| Diffusor diameter | 25 mm |
| Diffusor height | 15 mm |
| Distance between the pipes | 20 mm |
Cleaning
When algae start forming on your diffusor or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Stainless steel is easy to clean, however, it should be done diligently. After the cleaning process, your stainless steel products will be as good as new.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
- Soak the Stainless steelware in the solution for 1 to 4 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your Stainless steell should shine as if new
You'll find an extensive how-to (in German) with pictures in our Aquascaping Wiki under Glaswaren reinigen.
Aquasabi
Aquasabi is our own brand, under which we offer high-quality products with a very good price-performance ratio. Carefully selected CO2 diffusers, CO2 bubble counters or lily pipes are just some of the items we sell under this brand and which will surely add to the value und the beauty of any aquascape. For this reason, many aquascapers and planted tank enthusiasts use products by Aquasabi.
Besides the good price-performance ratio, our main focus is on the satisfaction of our customers. This is the reason why our doors are always open for those who need help with our products.
When it comes to special aquatic plants, water plants from Aquasabi are just the thing for you. We offer rarities from our own cultivating tanks or import them specifically. These plants are otherwise hard to come by, and most of them cannot be purchased from other shops. We have high quality standards, which make Aquasabi plants a good choice for aquascapers, planted tank enthusiasts and aquatic plant collectors who want to enrich their tanks with rare aquatic plants. Special mosses, particular stem plants, hard-to-come-by ferns or very rare forms of the genus Bucephalandra are only a few of the plants we are proud to offer.
Manufacturer Information
| Manufacturer | |
|---|---|
| Name | Aquasabi GmbH & Co. KG |
| Street | Salzdahlumer Str. 196 |
| City | 38126 Braunschweig |
| State | Niedersachsen |
| Country | Deutschland |
| info@aquasabi.de | |
| Website | www.aquasabi.de |
General information
| Item no. |
|
| EAN | 4250585200784 |
| Weight | 0,20 kg |
| Shipping weight | 0,20 kg |
Customers ask customers
You have questions about this product? Ask other customer or our support team about this product!
Customer reviews
13 Reviews
| 5 Stars(11) |
|
| 4 Stars(1) |
|
| 3 Stars(1) |
|
| 2 Stars(0) |
|
| 1 Star(0) |
|