Aquasabi CO2 Nano Diffusor J Pipe
- Made of high-quality glass
- Efficient CO2 atomisation through ceramic membrane
- For nano aquaria and small aquascapes
- Assembly without any suction cups
- Visually very appealing
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
The J Pipe nano diffuser is perfect for nano aquascapes and tanks in which you want to inject CO2 without hindering tubing inside the tank. The high-performance ceramic membrane creates ultra-fine CO2 bubbles, which spread in the entire tank. The CO2 can thus be absorbed by the plants in the best way possible. J Pipe nano diffusers are made of glass and thus they are almost invisible in the aquascape/aquarium.
Features
- With high-quality ceramic membrane
- Made of glass
- Compatible with pressurised gas cylinders and limited compatibility with biological CO2 supplying systems (biological CO2 supplying systems need to produce at least a pressure of 1 bar)
- With connection for commercially available 4/6mm CO2 tubing
- No need for suction cups: just hang the diffuser over the aquarium's edge
Usage
It is recommended to use a suitable hose for connecting glassware. Soft hoses reduce the risk of glass breakage when connecting. The piece of tubing used should be kept as short as possible to avoid unnecessary CO2 losses.
Silicone hoses are not pressure-resistant and therefore cannot be used for the connection to the pressure reducer.
For aquariums
| Item | |
|---|---|
| Nano Diffusor J Pipe 15 | up to 30 Litres |
| Nano Diffusor J Pipe 20 | up to 60 Litres |
Dimensions
| Nano Diffusor J Pipe 15 | |
|---|---|
| Total height | 140 mm |
| Distance between the pipes | 8 mm |
| Diffusor diameter | 15 mm |
| Diffusor height | 20 mm |
| Nano Diffusor J Pipe 20 | |
|---|---|
| Total height | 180 mm |
| Distance between the pipes | 6 mm |
| Diffusor diameter | 20 mm |
| Diffusor height | 20 mm |
Cleaning
When algae start forming on your glassware equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Glassware is easy to clean, however, it should be done diligently. After the cleaning process, your glassware products will be as good as new.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
- Soak the glassware in the solution for 1 to 4 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your glassware should shine as if new
You'll find an extensive how-to (in German) with pictures in our Aquascaping Wiki under Glaswaren reinigen.
Aquasabi
Aquasabi is our own brand, under which we offer high-quality products with a very good price-performance ratio. Carefully selected CO2 diffusers, CO2 bubble counters or lily pipes are just some of the items we sell under this brand and which will surely add to the value und the beauty of any aquascape. For this reason, many aquascapers and planted tank enthusiasts use products by Aquasabi.
Besides the good price-performance ratio, our main focus is on the satisfaction of our customers. This is the reason why our doors are always open for those who need help with our products.
When it comes to special aquatic plants, water plants from Aquasabi are just the thing for you. We offer rarities from our own cultivating tanks or import them specifically. These plants are otherwise hard to come by, and most of them cannot be purchased from other shops. We have high quality standards, which make Aquasabi plants a good choice for aquascapers, planted tank enthusiasts and aquatic plant collectors who want to enrich their tanks with rare aquatic plants. Special mosses, particular stem plants, hard-to-come-by ferns or very rare forms of the genus Bucephalandra are only a few of the plants we are proud to offer.
General information
Please choose a variant to see more information.
| Item no. |
|
| EAN | |
| Weight | |
| Shipping weight |
Customers ask customers
You have questions about this product? Ask other customer or our support team about this product!
Customer reviews
28 Reviews
| 5 Stars(9) |
|
| 4 Stars(9) |
|
| 3 Stars(4) |
|
| 2 Stars(4) |
|
| 1 Star(2) |
|
Really delicate, could be approved by narrowing the end where the tubing is connected. Tried for hours with warming, stretching the tube and with soap, but in the end it snapped. (read more)
I bought this diffusor for O2. Its difficult mounting the tube to the glass, but with a little bit of warm water and lots of patience, youll get there. (read more)
When trying to take the hose off for cleaning, the glass broke! It was really weak in the bend. Also, the ceramic disk must not have been properly glued in since large bubbles... (read more)