![WYIN - CO2 Bubble Counter - Black - B-stock](https://www.aquasabi.com/media/image/product/39029/md/wyin-co2-bubble-counter-black-b-stock.jpg)
![WYIN - CO2 Bubble Counter - Black - B-stock](https://www.aquasabi.com/media/image/product/39029/lg/wyin-co2-bubble-counter-black-b-stock.jpg)
WYIN CO2 Bubble Counter Black B-stock
- Made of high-quality aluminium
- Check valve included
- Attractiv design
- Available in different colours
- B-stock
Sign in or Register
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
These stainless steel CO2 diffusers dissolve up to 98% of the CO2 running through them. Small CO2 bubbles are distributed in the tank and guarantee an optimal CO2 uptake by the water plants. The CO2 dissolves easily in the tank due to the large ratio of surface to volume of the ceramic membrane.
These CO2 diffusers come with a combined J-Pipe. Additionally, two transparent suction cups are included.
Features
- with high-quality ceramic membrane
- Made of high quality stainless steel
- compatible with pressurised gas cylinders and limited compatibility with biological CO2 supplying systems (biological CO2 supplying systems need to produce at least a pressure of 1 bar)
- with connection for commercially available 4/6mm CO2 tubing
- transparent suction cups included
- Replaceable ceramic membrane
- B-stock
Note - B-stock
This item is sold as B-stock. The item shows slight scratches which cannot be portrait photographically.
Dimensions
CO2 Diffusor 25 mm - 20 cm | |
---|---|
Total height | 190 mm |
Total width | 70 mm |
Diffusion area's diameter | 25 mm |
Diffusor diameter | 35 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 25 mm - 25 cm | |
---|---|
Total height | 265 mm |
Total width | 70 mm |
Diffusion area's diameter | 25 mm |
Diffusor diameter | 35 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 25 mm - 30 cm | |
---|---|
Total height | 295 mm |
Total width | 70 mm |
Diffusion area's diameter | 25 mm |
Diffusor diameter | 35 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 25 mm - 35 cm | |
---|---|
Total height | 355 mm |
Total width | 70 mm |
Diffusion area's diameter | 25 mm |
Diffusor diameter | 35 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 25 mm - 40 cm | |
---|---|
Total height | 400 mm |
Total width | 80 mm |
Diffusion area's diameter | 25 mm |
Diffusor diameter | 35 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
Cleaning
When algae start forming on your diffusor or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Glassware is easy to clean, however, it should be done diligently. After the cleaning process, your glassware products will be as good as new.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
- Soak the glassware in the solution for 1 to 4 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your glassware should shine as if new
You'll find an extensive how-to (in German) with pictures on our community page Flowgrow.de under Glaswaren reinigen leicht gemacht
WYIN
General information
Item no. |
|
EAN | |
Weight | 0,10 kg |
Shipping weight | 0,10 kg |
Customers ask customers
You have questions about this product? Ask other customer or our support team about this product!