WYIN CO2 Diffusor Aluminium Pink 265 mm B-stock

WYIN CO2 Diffusor Aluminium Pink 265 mm B-stock

  • Made of high-quality aluminium
  • Efficient CO2 atomisation through ceramic membrane
  • Available in different colors
  • The necessary suction cups are included
  • B-stock
In stock, only one left
Free shipping on orders over € 60,- within Germany Change region
Express delivery possible
1-3 business days - order within the next 6 hours and 50 minutes and we’ll deliver tomorrow at the earliest
I want to order to 
confirm
€ 
29.
90
incl. VAT
plus € 5,90 Shipping
Quantity:
Item is now in your shopping cart!
View my cart

Item question

We’re here for you!

Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.

Thank you for your question!

Thank you, we’ll get in touch!

Close window

You already sent us a question.

Please wait a few minutes

Description

These stainless steel CO2 diffusers dissolve up to 98% of the CO2 running through them. Small CO2 bubbles are distributed in the tank and guarantee an optimal CO2 uptake by the water plants. The CO2 dissolves easily in the tank due to the large ratio of surface to volume of the ceramic membrane.

These CO2 diffusers come with a combined J-Pipe. Additionally, two transparent suction cups are included.

Features

  • with high-quality ceramic membrane
  • Made of high quality stainless steel
  • compatible with pressurised gas cylinders and limited compatibility with biological CO2 supplying systems (biological CO2 supplying systems need to produce at least a pressure of 1 bar)
  • with connection for commercially available 4/6mm CO2 tubing
  • transparent suction cups included
  • Replaceable ceramic membrane
  • B-stock

Note - B-stock

This item is sold as B-stock. The packaging of the item is damaged.

Usage

Recommended working pressure would be 1,5 bar.

It may take 24-48 hours till the CO2 diffusor produces a fine CO2 mist. The seal around the ceramic membrane needs to adjust to the new environment.

Alternatively it is possible to place the part of the diffusor with the membrane for 1-2 days into water. After watering the diffusor it should work properly. Please be advised that it is normal that a ceramic CO2 diffusor only produces fine mist from the whole membrane if you supply higher amounts of CO2. With less CO2 dosage only parts of the membrane produce fine CO2 bubbles.

Dimensions

CO2 Diffusor 25 mm - 20 cm
Total height 190 mm
Total width 70 mm
Diffusion area's diameter 25 mm
Diffusor diameter 35 mm
Diffusor height 15 mm
Distance between the pipes 20 mm
CO2 Diffusor 25 mm - 25 cm
Total height 265 mm
Total width 70 mm
Diffusion area's diameter 25 mm
Diffusor diameter 35 mm
Diffusor height 15 mm
Distance between the pipes 20 mm
CO2 Diffusor 25 mm - 30 cm
Total height 295 mm
Total width 70 mm
Diffusion area's diameter 25 mm
Diffusor diameter 35 mm
Diffusor height 15 mm
Distance between the pipes 20 mm
CO2 Diffusor 25 mm - 35 cm
Total height 355 mm
Total width 70 mm
Diffusion area's diameter 25 mm
Diffusor diameter 35 mm
Diffusor height 15 mm
Distance between the pipes 20 mm
CO2 Diffusor 25 mm - 40 cm
Total height 400 mm
Total width 80 mm
Diffusion area's diameter 25 mm
Diffusor diameter 35 mm
Diffusor height 15 mm
Distance between the pipes 20 mm

Cleaning

When algae start forming on your diffusor or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Glassware is easy to clean, however, it should be done diligently. After the cleaning process, your glassware products will be as good as new.

  • You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
  • Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
  • Soak the glassware in the solution for 1 to 4 hours (depending on the severity of the stains)
  • Take it out and rinse thoroughly
  • Now all the stains ought to be gone, and your glassware should shine as if new

You'll find an extensive how-to (in German) with pictures on our community page Flowgrow.de under Glaswaren reinigen leicht gemacht

WYIN

General information

Item no.
400.0002.42
EAN
Weight 0,19 kg
Shipping weight 0,20 kg

Customers ask customers

You have questions about this product? Ask other customer or our support team about this product!

Customer reviews

This item has not been rated
Please sign in if you want to write a review. Sign in
5 Stars(0)
4 Stars(0)
3 Stars(0)
2 Stars(0)
1 Star(0)