Item question

We’re here for you!

Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.

Thank you for your question!

Thank you, we’ll get in touch!

Close window

You already sent us a question.

Please wait a few minutes

Description

This high-performance inline diffuser is mounted in the tubing leading from the filter to the aquarium tank (pressure side). The integrated diffusion surface guarantees an extremely fine atomisation of the CO₂, which is thus dissolved in the water highly efficiently.
At the same time, this inline atomiser works almost without making any noise, completely without the annoying "twittering" many glass diffusers emit.
In contrast to other external reactors, the flow rate of the water within the filtering circuit is only marginally influenced, the water flows straight through the inline atomiser.

Safety swivel nuts on all the connections reliably prevent the hoses from slipping accidentally. Depending on the thickness of the filter hose you use you might run into problems when connecting. We can recommend the clear filter hose made by ADA, as it fits perfectly.

Included are two hose clamps that can be used as an alternative to the swivel nuts.

Please keep in mind that, as a rule, a working pressure of at least 1.8 bar is required for the inline atomiser to work properly. Sometimes, pressure regulators with a pre-fixed working pressure (1.5 bar) do not produce sufficient pressure for the atomiser. Thus it is recommendable to run the atomiser only on a pressure regulator that allows you to adjust the working pressure yourself.

Features

Extremely compact design
The flow rate of the water inside the filtering circuit is only marginally lowered
Ultra-fine bubbles guarantee a highly efficient solution of the CO₂ injected into the tank
As the inline atomiser is mounted in the filter circuit, the CO₂ gas is optimally distributed in the entire tank thanks to the filter current
Almost noiseless: no splashing, no humming, no twittering
Suitable for almost all tank sizes, from small to large aquaria
Suction cup holder not included in scope of delivery

Dimensions

UP Aqua - Inline Atomizer - 10 mm
Height	7,8 cm
Width	3,5 cm
Depth	2,5 cm
Fits hose	10 mm or 9/12 mm

UP Aqua - Inline Atomizer - 13 mm
Height	11 cm
Width	7 cm
Depth	4 cm
Fits hose	13 mm or 12/16 mm

UP Aqua - Inline Atomizer - 17 mm
Height	11 cm
Width	7 cm
Depth	4 cm
Fits hose	17 mm or 16/22 mm

Cleaning

When algae start forming on your glassware equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Glassware is easy to clean, however, it should be done diligently. After the cleaning process, your glassware products will be as good as new.

You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
Soak the glassware in the solution for 1 to 4 hours (depending on the severity of the stains)
Take it out and rinse thoroughly
Now all the stains ought to be gone, and your glassware should shine as if new

You'll find an extensive how-to (in German) with pictures on our community page Flowgrow.de under Glaswaren reinigen leicht gemacht

UP Aqua

UP Aqua is a manufacturer of innovative products for aquascaping and aquatic plant aquariums. Thanks to their excellent price-performance ratio, UP Aqua products are particularly interesting for the entry in the world of aquaristics. In addition to the particularly efficient Inline Atomizers, other interesting accessories for aquaristics are also offered. These include tools and accessories that make many aquarium tasks easier.