- Made of high-quality glass
- Efficient CO2 atomisation through ceramic membrane
- Visually very appealing
- The necessary suction cups are included
- Different sizes available
- Replacement Membrane for the JBL ProFLora CO2 Taifun Inline Diffusor
- Fitting for sizes 12/16, 16/22, 19/25
- High quality
- Very small CO2 diffusor
- Produces fine CO2 mist
- Special ceramic membrane for CO2
- Made out of acryl glass
- Suction cup included
- Made of high-quality glass
- Efficient CO2 atomisation through ceramic membrane
- Visually very appealing
- The necessary suction cups are included
- Suitable for small and large aquascapes
- Made of sturdy plastic
- Efficient CO2 atomisation through ceramic membrane
- Atomisation thanks to special membrane
- Very low noise
- Is mounted unobtrusively outside the tank
- Atomisation thanks to special membrane
- High efficiency
- Current is almost unimpeded
- Made of high-quality glass
- Efficient CO2 atomisation through ceramic membrane
- For nano aquaria and small aquascapes
- Assembly without any suction cups
- Visually very appealing
- Made of high-quality glass
- Efficient CO2 atomisation through ceramic membrane
- Visually very appealing
- The necessary suction cups are included
- For External Diffusor
- Compatible with M (12/16 mm) and L (16/22 mm)
- Durable material
- Easy installation
- Efficient CO2 atomization
- High-quality CO2 diffusor
- Elegant, compact design
- Precise ceramic membrane
- Includes suction cups
- Fits 4/6 mm hoses
- Inline diffusor
- High-quality aluminium
- Installation in filter outlet
- Effective CO2 distribution in water flow
- Reduced visible technology in aquarium
- Original replacement piece
- Easy to handle & clean
- Suggested working pressure 2,0 bar
- Compact design
- Space-saving in the cabinet
- Easy to handle & clean
- No influence on flow rate
- Unobstusive CO2 diffusor
- Efficient CO2 distribution
- Very fine atomisation
- Small, elegant diffuser
- With chamber for counting bubbles
- Incl. 2 suction cups
- For CO2 Micro-Perler
- Original Dennerle spare-part
- For small freshwater aquariums
- High-quality crystal glass
- For 4/6 mm tubes
- Ultra-fine CO2-atomisation
- Controlled CO2-Supply
- Made of high-quality, transparent acrylic
- Compact Form
- For hoses 4/6 mm
- Easy handling
- Throttling the flow rate in the CO2-reactor
- Made of durable plastic
- High hydraulic performance
- Simple technique
- Easy CO2-enrichment
- Maintenance-free operation
- Bubble count easily readable
- Especially small diffuser
- Particularly fine atomization
- For a hose-free aquarium layout
- different sizes available
- Especially small diffusor
- Particularly fine atomization
- Bracket included
- Different dimensions
- Extra small CO2 diffuser
- Produces fine CO2 mist
- Easy to hang over the edge of the tank
- For an organized and hose-free aquarium layout
- Available in two lengths
- Extra small CO2 diffuser
- Produces fine CO2 mist
- Length individually adjustable
- For an organized and hose-free aquarium layout
CO2 Reactors, diffusers and other CO2-feeding devices for your aquarium
There are many different ways of introducing CO2 for carbon fertilizing purposes into a plant aquarium or aquascape. At Aquasabi, we rely primarily on so-called diffusers, as these can dissolve a maximum amount of gas in the aquarium water and are therefore particularly efficient. Up to 98% of the CO2 gas flowing through is atomized into fine microbubbles by being pressed through a fine-pored ceramic membrane. Diffusers therefore have great advantages over flippers or paffrath bowls. However, a corresponding working pressure is vital. CO2 diffusers are therefore particularly suitable for reusable CO2 systems. Bio CO2 systems, for example, do not always offer such a high and constant pressure. But for this, we have a suitable solution in our shop, too: the Neo Air diffusers from Aquario. Even at low pressures, these diffusers will atomize the gas into fine bubbles and are therefore ideally suited for use with a Bio CO2 system in an aquarium.
Diffusers can be bought from our shop made of either glass, plastic or stainless steel. CO2 Additives and other accessories such as bubble counters made of glass are very popular in aquascaping due to their transparent design. The stainless steel models are a little more eye-catching, but also very robust and less susceptible to algae growth, so there is less cleaning effort. Diffusers made of plastic or acrylic glass offer a good alternative for the price-conscious aquarist or beginner.
Completely invisible CO2 technology can be realized with so-called inline diffusers or inline atomizers. The dispenser can be integrated into the hose line of the external filter and thus disappears imperceptibly into the base cabinet.
When buying a CO2 diffuser you should choose a model that fits the size of your aquarium. We offer a wide range of diffusers suitable for all aquarium sizes. A size specification is always noted in the item description in our shop.
We carry CO2 diffusers from many well-known manufacturers in the aquarium industry, such as ADA, JBL, Tropica and Cal Aqua Labs - and also offer our own high-quality processed glass diffusers in various price ranges from our brands Aquasabi and Aqua Rebell.